The TE3A-V2 electronic transfer machine is designed to be used with medium parts which have to be lifted during movement from one station to the next. It consists of two independent-drive units complete with electronically-controlled brushless motors. This feature ensures considerable operating versatility and adaptability to the different presses to which it must be fitted. The reduced size of the drive unit enables it to be installed inside the press on the die surface or between the “pillars”. Thanks to the sealed lubrication system, the TE3A-V2 can be used in upturned position, thus providing more space for manoeuvre on the die surface.

variable pitch up to maximum 450 mm adjustable by electronic control (on request up to 600 mm)

•

210 mm side movement for each bar, continuously adjustable

•

minimum bar inner edges 190 mm (other dimensions on specific request)

•

50 mm elevation

•

inside press housing option. Both on die surface and suspended

•

“virtual cam” system movement that reduces the mechanical stresses on the machine and maintains a high transfer unit operating speed

•

Dimension bar outer edges:
TE3A-V2 model 700 = mm 680
TE3A-V2 model 1000 = mm 980