Transfer T150R4S has been designed to withstand heavy transfer loads but still retaining high speed performance. The transfer is built with four modules housing the drive cams and opening of the bars. Opening of the bars is ensured by direct coupling with the press slide. Transport involves with timing belt drive systems. There are not any drive members crossing the plane of the die or press. It can be provided with bars of structural aluminium or carbon fibre, size: 40x80, 30x60 and 20x60 mm. It is designed with transfer pitch of 150, bar opening 65 + 65 mm per side and speeds over 120 strokes/min. Other transfer pitches and openings with difference performance characteristics available on request.

transfer pitch 150 mm max (on request mm 100/120/125/175)

•

bar opening from 65 mm per side (max 80)

•

adjustable distance between outer edges of the bars when open up to max. position of 1000 mm

•

operating speed exceeding 120 strokes per minute

•

the timing cycle diagram can be studied on request for each specific application

•

adjustable width dimensions on request, due 2+2 transfer unit construction