Transfer T150R2S has been designed to withstand heavy transfer loads but still retaining high speed performance. The transfer is built with two modules housing the drive cams and opening of the bars. Opening of the bars is ensured by direct coupling with the press slide. Transport involves with timing belt drive systems. There are not any drive members crossing the plane of the die or press. It can be provided with bars of structural aluminium or carbon fibre, size: 40x80, 30x60 and 20x60 mm. It is designed with transfer pitch of 150, bar opening 65 + 65 mm per side and speeds over 200 strokes/min. Other transfer pitches and openings with difference performance characteristics available on request.

transfer pitch 175 mm max (on request mm 100/120/125/175)

•

bar opening from 65 mm (on request mm 80)

•

adjustable distance between outer edges of the bars when open up to max. position of 450 mm (mounting 80mm bars)

•

operating speed exceeding 200 strokes per minute

•

drive can be central or side, either top drive or underdrive

•

the timing cycle diagram can be studied on request for each specific application